Radiant Warmer

Radiant Warmer is innovatively designed to meet thermoregulatory requirements of new born infants who suffer extremes of heat loss. The Radiant Warmer can be used in delivery rooms and neonatal intensive care units. The micro control based servo control Radiant Warmer detects minute variations in skin temperature and adjust the ceramic infrared heater output to maintain the infant's temperature at a prescribed pre set level.

Salient Features

• The controller is based on Microcomputerized system
• Large bnght displays are easy to monitor and for viewing from a distance
• Double digital display system provided to measure the Infant temperature and to set the required temperature
• Feather touch keys provided for easy operation
• LEDsystem provided to indicate the heater output
• Manual control system provided
• Fault Indications with alarm for
  • Baby probe failure
  • 1 ^oC temperature high
  • 1 ^oC temperature low
  • High temperature cut-off
  • Power failure

Baby Probe

• Baby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software The probe is made up of silicon sheathed cable, which allows easy cleaning

Baby Trolley (optional)

• A detachable baby trolley which consists of large baby tray & is made of stainless steel frame with three side acrylic collapsible walls. Trendelenburg & fowler system provided

Observation Lamp

• A halogen based observation light focus on any area on the bed

Heater

• Smgle element (E approved ceramic heater placed in a parabolic reflector

Other Facilities

• Provision of Oxygen cylinder
• I V stand provided
• Monitor tray provided

Physical Parameters

• Length : 700 mm
• Width : 430 mm
• Thickness : 25 mm
• Working level from ground : 900 mm
• Baby tray is tilt angle on either side : +/-8^omax
• Weight Approx : 35 kg
• Castors : 50 mm with 2 brake wheels and 2 non - brake wheels

Observation Light

• Halogen based Power required : 230V, 50 W

Note : Best results obtained if air convective current is low.