Power Stabilizers

We offer a diverse array of Stabilizers, as a solution to the major problem of voltage fluctuation in every part of the country. These stabilizers provide efficient power management to cater to the needs of the industrial units running round the clock. Our products are manufactured, considering the fact that 90% of industrial load is due to the motors, which draw a noticeably high current at low & high voltage. The higher current affects the electrical motors (Particularly smaller capacity motors up to 7.5 H.P.) in following three ways:

• Higher current produces higher losses in electrical motors which causes premature failure of winding
• These higher losses of electric motors also increase the losses of cables, switches, transformers and others associated equipments
• For smooth continuous operation of motors, overhead relays are usually set at 20% higher setting

Adverse effects of single phasing

• The Line current increase by 1.5 times
• If the relay setting is at 15-20% higher than actual operating current than the relay will take 4-6 minutes to trip
• The motor (particularly smaller capacity motors up to 7.5 H.P)
• Cannot withstand this high current for such a long time and in most of the cases it burns out before the relay trips
• Heavy short circuits current flows through the relays, contactors, cables etc.
• Under this condition when the relay contactor trips, they produce sparks and some times bursts
• This further damages the switchgear, and in some of the cases may cause fire also

Advantages of stabilizers:

• Maintaining 390/400 volts via installation of a stabilizer ensures smooth operation
• 15-20% lesser drawing current
• Further, the relay settings can be reduced by 15-20%
• In case single phasing occurs, the relay will trip in 40-50 seconds
• The motors can withstand the high current for this period and will be safe
• The relays, contractors, switchgear, etc. incorporated with motors will also be safe

Features:

• Reduction in breakdown of Electrical Equipments / Power Bills / MDI
• Improvement in Power Factor / Uniform Quality of end product good product
• Depreciation @ 60% as per Income Tax Act