Polyurethane Mobca Hot Cast Machine
- Customer pickup,
- Courier
- In detail
We offer american make polyurethane hot cast variable ratio machine with following features.
PREPOLYMER & MOCA metering pumps to accommodates mix ratios from 5:1 to 10:1; mechanical ratio adjustment controls; 3 air motor with stroke adjusters; 30 psi check valves on pump outlets; lube kit for curative pump seals; and NEMA control enclosure with required switches and indicator lights , High temp pump head heater for pre-polymer, stroke counter & Heating for pre-polymer metering pump tube. Model MD700 dynamic mix head horizontally mounted on machine frame with 4200 RPM electric motor, disposable plastic blade and baffle mix cartridge, manual pour & recycle valves, injector/check valves, product feed and recycle hoses, dispense tube with pistol grip and dispense switch or foot switch, Dispense manifold heater, Heating for 3 way manual pour & recycle valve of pre-polymer component, Heated hoses for pre-polymer and MOCA, Solvent/air flush kit with pressure tank, hose and manual valve at mix head, minimum 20 psi pressure rated, 10 gallon, stainless steel tank with clamped lid for pre-polymer with heat blanket and insulation.
Low level sensor for pre-polymer tank with indicator light for low level condition, Electric drive agitator with magnetic coupling & shaft for pre-polymer (no seals).
Low pressure, 1 gallon, heavy wall aluminum tank for MOCA with bottom ring heater, Insulation for temps up to 300 degrees F. Digital set/readout temperature controllers with thermocouples for each of 8 heat zones Installed in a larger NEMA control enclosure on a larger machine stand Spare parts kit with spare mixer cartridges, pump seals.