Characteristics of goods: "ADV-22"
ADV-22 Polyurethane compound
The compound of ADV-22 is applied to production of the elastic relyefoobrazuyushchy matrixes used for receiving plaster and concrete products the, including products from architectural concrete made on technology of the accelerated formation at temperature to 100os, and also for production of elastic coverings with the increased water resistance.
At observance of service regulations of matrix on the basis of compound of ADV-22 maintain over 100 molding cycles in the conditions of conveyor production of concrete products. Use of elastic matrixes allows to receive products with difficult relief and negative biases. And production of the form much more simply and most quicker other ways.
The polyurethane compound of ADV-22 represents monolithic rubber-like material which is received by mixing of the ADV-A-22 and ADV-B-22 components in the set ratio manual or mechanically. Color of compound can be different in coordination with potre-
Components A and B - liquids, well fluid at the room temperature.
Mixing of components is carried out at room temperature. Viability of compound (time from the beginning of mixing of components before loss of flowability of composition) is varied the number of the catalyst entered into the ADV-A-22 component or provided to the customer for independent introduction. The socket of form is made usually in a day. Through cure of compound happens at room temperature within 3-5 days.