Microsprinklers are made from the best quality polyacetal resin to give the maximum life. Each Microsprinkler assembly consist of microsprinkler with 1 mtr of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral. Special holding stakes to hold the assembly firmly also available as an optional item.
The unique and the most important feature of this microsprinkler is that it covers a radius of over 3mtrs at a 1 .2kg/cm2pressure of water in the lateral. giving a discharge of 70lph.with a 90 uniform coverage of water. Higher coverage at minimum pressure.
It is recommended that for effective working of the system the microsprinklers should be installed at 4mtrs intervals on 16mm laterals with the maximum of 7 microsprinklers per lateral.The laterals should also be put at every 4mtrs.
Very uniform wetting of the entire area is achieved- hence beffer and higher yields- pays you back with increased profits in 1st year itself.
Most important is the cost - these microsprinklers are now available at the most reasonable cost and hence have all the advantages over the conventional sprinkler system with best uniformity -hence substantial saving of water and cheaper to install. Highly affordable.
This is the future of the irrigation industry and already all leading and progressive farmers are switching onto this system.
This is best suitable for all crops where it is necessary to cover entire area, like ginger, safed mush, onions, etc. and all vegetable plantations and nurseries.