Metal Cutting Fluids
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Seller
India, New Delhi
(View map)
(View map)
+91(
Display phones
Products of other enterprises
Description
| Powerzone MF Oil, manufactured based on a blend of paraffinic mineral base oils plus suitable additives to provide reliable properties for the recommended applications. Applications: As an emulsion lubricant and coolant suitable for application in most type of machining and metal working operations. Advantages: • Mixed readily with water to form stable emulsions • Good rust preventive and anti-foam properties • Formulated to effectively remove heat from metalworking operation • Emulsion resistant to freezing and additive separation • Protection against bacterial growth and deterioration • Low- staining characteristics Preparation: Soluble oils are prepared for use by mixing them with relatively large portions of water. The oils must always be added to the water. Never add the water to the oil. Usually one part oil is stirred into four parts water. Adding water to this mixture then makes the desired dilution. Oil should never be added directly to the existing emulsion. For best emulsion stability, rust and bacterial growth protection, low hardness water should be used to prepare emulsions. It is important that the correct oil-water proportions be maintained in service. Evaporation in the water, which is espacially rapid inmachining operations that developed high temperatures, may enrich the emulsion excessively. Conversely, finely divided prticles carried away by the emulsion may, when filtered out, remove more oil form the emulsion than water and thus make the emulsion leaner. Oil concentration should be checked at any time. With the oil separated from the water, its concentration can easily be observed and corrected as necessary by adding an emulsion with definite concentration. Avoid strong suitable oils below freezing temperatures. If freezing should occur, re-warm to room temperature and mix product well before using. |
Contact the seller
Metal Cutting Fluids
We recommend to see