Ethylene Vinyl Acetate
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
We engaged in supplying Ethylene Vinyl Acetate
| Density | 0.92 - 0.94 g/cm^3 |
| Gamma radiation resistance | Fair |
| UV light resistance | Poor |
| Max continuous Service temperature | 45 - 70 C |
| Min continuous Service temperature | 60 C |
| Sterilization insulation (Repeated) | Poor |
These resins are not hygroscopic and may be used as received without need for drying.
At temperature above 220 C, EVA resins can evolve toxic fumes.
Injection molding :-
Experience has shown screws normally used for injection molding of low density polyethylene to be satisfactory.
Melt temperature: 150 - 200 C
Mold temperature: 15 - 40 C
Extrusion :-
A three- zone screw with a total L/D ratio of at lease 20 is recommended.
Melt temperature is, generally, in the overall range of 95 - 205 C.
The melt temperature depends upon the melt index of the resin, the vinyl acetate and the part configuration
Contact the seller
Ethylene Vinyl Acetate
We recommend to see