End suction pump
- 8337.35 INR/m3 - from 2 m3
- Customer pickup,
- Courier
- In detail
MBH End Suctuion Pump is designed as per ISO 2858. This Standardized pump also known as Back pullout Pump, is Horizontal, radially split volute casing pump in back pull-out design to single-stage, single-entry, with radial impeller. Also available in variant MOC's and impeller designs like semi-open impeller. These pumps are used in handling of aggressive liquids in the chemical and petrochemical industries as well as in refinery and fire-fighting systems, handling of brine.
These Centrifugal pump is used as Fire Pump, Chemical Pump, HVAC, Air Condition pump, Circulating pump, Water pump etc.
The General Spec are as under
Type of installation |
Stationary |
Maximum flow rate |
550 m³/h |
Minimum flow rate |
2.5 m³/h |
Maximum head |
102 m |
Minimum head |
3 m |
Speed of rotation |
3500/ 2900 / 1400 / 950 revolutions/min |
Maximum discharge-side pressure |
10 bar |
Type of bearing |
Ball bearings |
Drive frequency |
50 Hz / 60 Hz |
Type of drive |
Electric motor |
Type of installation |
Long- coupled |
Type of coupling |
Direct |
Type of lubrication |
Oil lubrication / Grease lubrication |
Max. permissible fluid temperature |
140 °C |
Nozzle position |
End suction |
Pump set location |
Dry installed |
Installation position |
Horizontal |
Shaft seal type |
Mechanical seal / Gland packing |
Main applications |
Oil / Gas / Turbid water / Building services / Industry and process engineering |
Standard |
DIN |
Suction characteristics |
Non- priming |
Type of casing |
Volute casing |
Casing material |
SS 316/ SS 410 / SS 304 / Cast iron / Cast steel / Nodular cast iron / Bronze / Chrome nickel steel |
No. of impeller entries |
Single entry |
Impeller material |
SS 316 / High chrome / SS 304 / SS 410/ Graded CI / Ni Hard |
Type of impeller |
Radial / Multi-vane impeller / Closed / Semi Open |
Shaft material |
SS 410 / SS 316 |